Getting a Bump in Size

Posted on Posted in general

Since I reached my adult age, I’ve felt self conscious about my size. I thought about having an enlargement procedure done, but I wasn’t exactly sure how it would work out. Whatever process would be done would more than likely be painful, and there was a good chance that my insurance wouldn’t cover it. Instead, I looked for pill based solutions to my problem, and found out about Vimax. I looked at some reviews from people who tried it before and they were satisfied with the results, so I thought it would be nice to give it a shot.

I ordered some of the pills online and tried them over the course of a month. I knew that it would take a while for the results to start coming, so I tried to give myself a little patience.…

A Simple Switch Helped to Make My Skin Look Better

Posted on Posted in general

I woke up one morning and immediately felt pain from a new and very large pimple on my face. I looked at it in a mirror and was alarmed to see that it was large. Later, at work, I complained to a coworker that I had to meet a client with that swollen, over-sized zit on my face. She asked if I had tried swapping out my usual cosmetics for natural makeup instead. Confused, I asked her what the difference was. I was also careful to wash off my usual makeup products each night, so I didn’t understand what good buying something else would do for me. She explained that switching would help me to see if the not-so-good ingredients in my usual makeup was the cause for my continued breakouts.

The day that my coworker gave me the tip on switching my makeup products out for something new, I had a big client to meet. He’s the CEO of a well-known company in our area.…

Intimate Times Can Be Stress Free

Posted on Posted in general

There are many people that have a problem when it comes to getting intimate with their partner. Instead of being shy about it, it is important for people to be open and honest with the people that they are close with. Being honest is something that allows people to get closer, when they feel like they can talk about anything. My husband went to www.buyvigrxplus.co.uk so that he could get a pill that made him ready for me when I was ready to get intimate. People say that they do not want pills or anything extra for their sexual arousal or performance, and I would tell them that it is nothing to be ashamed of. People have different reasons for having erectile problems, they can range from mental conditions to medications that may inhibit a man to have an erection when he is in the mood to be intimate with his partner.

I was spending time with the doctor that treats my husband for his sexual dysfunction while my husband was using the restroom and I was talking to him about how many of my friends our age do not like to talk about the pill. The pill has helped us and our sex life has never been better. I did not want to talk about the sexual needs and desires of my husband and I with our friends because we are very private people. My husband would be so upset if he knew that I was going to speak with our friends about what we do in the bedroom, but I told him that talking about it helps validate that we are not the only ones who have a problem. The problem can be fixed and helped if you let it work, the pill has changed our life and we are now stress free.…

The Danger of Trying to Cut Up a Fallen Tree

Posted on Posted in general

We had a bad storm a few days ago. We have a wide lot that our house is on, and a tree fell over sideways. It was at the edge of our lot, and it fell across it in the back yard. From the root ball to the tip of the tree, it just fits in our yard. We called a company that does tree removal in Long Island NY to get it. It was laying on its side in the yard like a crane just set it down there. It was planted just inside the fence on the one side, and the top branches were barely touching the fence across the yard where it lay.

I tried to cut it up with a little electric chainsaw I had for trimming branches. It was no match for that big tree. I got a lot of the smaller branches off, but it rolled when I cut a thicker one. That scared me as that tree weighs several tons. I could have been killed if it rolled on top of me.…

Taking Care of Fine Lines and Wrinkle As I Age

Posted on Posted in general

As with most women my age, I am starting to see the appearance of fine lines and wrinkles on my face. I have become very self-conscious about this and want to go ahead and take control of it and try to take the best care possible of my skin from here on out. There are so many products out there that claim to reverse the effects of aging and it is difficult to determine which ones actually work. A friend of mine told me about LifeCell skin care which is a revolutionary anti-aging cream that has taken skincare to a whole new level.

Not that I don’t trust my friend but I need to do a bit of research on this myself. A lot of anti-aging products are quite expensive and I really can’t afford to learn by trial and error. I’d probably go broke trying to find the right one. So I got out my laptop and started doing some research to see the authenticity of this product.…

I Have Been in Montreal for a Month

Posted on Posted in general

This is a really interesting city and strange because nearly every person that you mean can speak French and English at a functional level. In theory I can do, but in practice my French is really bad. I probably could have gotten pretty good at it if I had come here twenty five years ago when I had taken two years of it in high school. Meg came up here to see me for the weekend and wanted to order careprost in Canada, but I had absolutely no clue what this was or how you get it. It turns out that this is supposed to make your eyelashes look thicker, you put it on with the same sort of brush that you use for other types of cosmetics. It is not something that I had any idea how to obtain and in fact I had no clue that she used the stuff. I honestly do not really think all that much about eyelashes to be totally honest.…

The Secret to How Movie Stars Look Great on the Big Screen

Posted on Posted in general

If you use makeup, you know that the foundation layer is the base that everything else is built upon. You have probably seen pictures of movie stars taken when they do not have makeup on and wondered how they look so good on the screen. Well, one product used to cover up serious skin flaws is Dermacol . It is actually marketed as the primer makeup for photo and video shoots. It may sound funny to make a comparison, but the primer coat that goes on a nice shiny new car is what lets the paint on top look its best.…

Remote Key Enabling Advanced Security For Your Vehicle

Posted on Posted in internet, programming, technology

You can now leave all your worries about your car being stolen. Just install the new remote key system that keeps your car safe from the intruders. If an invalid entry is detected, this advanced system arms the alarm and informs you as well.

Most of the recent models of vehicles are enabled with the advanced technology of remote key that offers great safety measures for your car. The keyless entry remote transmits radio signals to the vehicle seeking permission to perform various actions. There is a coding system in the chip that matches with the system installed in the car. The only person possessing the remote key will have access to the car. It comes as an added advantage because you do not have to worry about your car being hotwired. You can also upgrade your car with the advanced security features offered by the remote key system.

If your car is not enabled with such an advanced feature, you can secure your car by purchasing the remote key designed for the model of your car. You can even get replacement key blanks, if you have lost your already owned remote key. Key blanks can be used after they are laser cut to match your car’s ignition switch. It is then programmed to be used by the owner of the car. Key blanks are available at hardware stores but should be purchased over the Internet for better quality. The chip key has become the most essential part of the security system of any car. The level of security offered by this key has eliminated the opportunities for thieves to drive off parked cars. The remote key helps a great deal in keeping your car safe from the intruders.

For the programming of your key, you can hire a locksmith to do that for you. If you choose to do it yourself, you must follow the simple instructions that are sent to you from the company. First and foremost, you will have to cut your key by a locksmith or at a hardware store. For the programming, you must have one working key of your vehicle which is required to start the engine. The new key that you receive for the vehicle must have a code stamped on the blade. If it is not there, you should immediately contact the company and get help to find the key you need.

The remote key also arms the car alarm as soon as you leave your vehicle. For the assurance of the arming of the alarm, the car flashes its lights and makes a unique sound. If anyone tries to hotwire the vehicle, the advanced system activates the alarm and informs you by sending the signals to the remote key. Other beneficial features of this key are that it allows you to lock / unlock your vehicle from a distance. If you have forgotten to lock your car, you can simply press the button and do it even from inside the building. …

The Importance of Web Database Development

Posted on Posted in internet, website

Web database development is the process of creating a website whose contents are not sitting on server files, but on columns and tables in the databases. A website that stores data in the files system is a static website; the website that is database driven is most of the time referred to as a dynamic website. More functionality is offered by a dynamic website than by a static one. Some of these functionalities include the following:

Construction site crane building Web Design 3D words.
  • shopping cart,
  • customized homepage,
  • ability to store vast amount of data about your business – services and products.
  • advanced search functionality with ability for users to filter the results in a given field, such as “date” or “price:,
  • ability for users to register for a newsletter or post their questions to forums, post comments, and update their profiles,
  • ability to integrate with corporate applications, like HR systems, CRM systems,
  • reducing site maintenance,
  • enhance web interactivity
  • ability to easily perform statistical analyses and complex queries,
  • ability to sort and retrieve data efficiently, and more.

If you are a technologically inclined person, you might be able to work on your web database development. However, if you believe you do not possess the necessary skills, you can hire a team of database developers, and there are many of them on the internet. But how can you find the team that is best for you? First of all, the company should have a strong background in website design and database development. They should be able to have the right tools and technologies and have prior experience in implementing these latest software and technologies in the development.

Besides the above requirements, the specific expertise of the programmers and engineers should also be looked into. Make sure that they have many years of experience in developing web databases. The staff of engineers and programmers must be experts. Creating a database driven website does not only need graphic artists and web designers, but a full team of skilled web programmers, web development engineers and application developers.

These experts in web database development should be closely coordinating with you so they will be able to determine the requirements and needs of your website. They should also be able to assess your existing database (if any), and identify the right solution and technologies that they should implement. So before you sign any contract with any database developer, you should have a roster of their skilled team. They should have a design conference with you to ensure that you’ll have a database driven website.

In these days of the advancing internet, database driven websites are getting popular. Users need highly dynamic and interactive web solutions, so websites should be able to address this requirement of web users. If your website is database driven, it is certain that it will always be updated and ready to provide complete information to your online visitors. Repeat visitors will be attracted to your site if it is found useful, highly …

Internet Marketing Exposed – Does Making Money Online HAVE to Be Difficult?

Posted on Posted in internet, website

Internet marketing newcomers are lucky nowdays. 8 years ago, finding information about making money online was difficult. These days, information is everywhere you look. It's not a question of whether there is help available, but if you act on the information.

So the answer to the question – does making money have to be difficult? Yes. Depending on various degrees of determination and smarts, making money online can be hard or it can be easier. Note, I said easier, not easy. As the saying goes, the hard road leads to the easy road while the easy road leads to the hard road.

Just to give you an idea of ​​what it takes to run an online business, here is what you need: writing skills, marketing skills, ad writing skills, web design know-how, setting up a website, product creation, planning and visualization, and the list goes on.

Many people just want a push-button solution to making money without learning anything because they are sick and tired of learning after all those years in school. Well, let me tell you that there is no magic pill and you will have to pick up skill sets if you want to succeed. If you want to earn a professional income, guess what? You have to become a professional at what you do. Most people do not look at it at that way. They look at the Internet as a lottery, basically.

If you're still struggling to make a penny online, I hope this article has been a wake-up call to you. It's time to go to work. …

HDMI Splitter – What Exactly Is HDMI Technology And Where Can You Use It

Posted on Posted in internet

High Definition Video and Audio has lead to new heights in immersive entertainment experiences. With increased pixel density and better surround sound options, the home theater experience has become a reality. Of course these improvements in entertainment quality required a better streamlined connectivity option which is provided by the High Definition Multimedia Interface (HDMI).

HDMI has been adopted as the preeminent interface for providing the most complete and immersive entertainment experience. As the idea of ​​what that immersive experience should be changed, the HDMI standard has been revised to address these improvements. Early HDMI simply addressed the provision of quality video and audio signals to a compliant display. Newer revisions, however, include the ability for the display to provide information back to the source and create the more complete experience.

Now it is possible for the display to share the source device's internet connection through the same HDMI cable. It is also possible for the remote control to control multiple devices in remote locations through the Consumer Electronics Control (CEC) feature. Equally important are other features such as the Audio Return Channel (ARC) which allows the display to send audio back to an audio receiver and speaker system. Perhaps the greatest improvement of all is the ability to include 3D video at resolutions as high as 4Kx2K. All of this means that the home entertainment center is able to rival the experiences of many professional cinemas.

Home entertainment is not the only area of ​​the market that has benefited from these improvements. Hospitals, advertisers, hotels, and bars are all taking advantage of these new features. It becomes easy to imagine situations where these institutions may need more than one display that has each of these features showing the same content. This is where devices such as an HDMI Splitter have been adapted to meet a very specific need. Whether it is a bank of televisions in a bar, or spread out across the lobby of a hotel to provide information to guests, the applications are nearly limitless.

Cat5 HDMI Splitter Extender products can also be used to provide information to health care professionals and their patients in locations safely removed from harmful environments or sensitive devices. These are typically used for long distance HDMI signal transmission over Cat5e / Cat6 UTP or STP cables. They maintain perfect image quality and support video resolutions up to 1080p. The biggest advantage of using these HDMI Splitters is that they eliminate the need to run long HDMI cables. …

How to Speed ​​Up a Windows XP Computer Exception Disk Defragmenter or Disk Cleanup

Posted on Posted in computer

You may know some ways to speed up your PC such as Disk Defragmenter, disk cleanup and things like that. The following provides you more possible methods to speed up a windows XP computer.

(1) Shutdown Dr. Watson:

Dr. Watson is a Windows XP tool for analyzing computer crash. When windows application programs crash, Dr.Watson will pop up automatically and will save the relative wrong contents into dump files to programmers for a further analysis by default. However, recording dump files is useless for common users while the whole procedure will take you a long time and occupy mush disk space. To shutdown Dr. Watson, you can follow these steps:

Open registry editor -> find the key "Auto" under "HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionAeDebug" and then change the key value to 0 -> press F5 key to refresh your computer.

(2) Start up DMA mode of CD-ROM:

To achieve the goal, please follow the below steps:

Right-click My Computer -> Choose Properties -> Select Hardware -> Choose Device Manger -> unfold IDE ATA / ATAPI controllers -> Double-click Primary / Secondary IDE channel -> Select Advanced Settings and check whether DMA function has started up

(3) Close all unnecessary devices:

The system always tries its best to prepare drivers for all devices at the expense of slowing down the computer and much resource being employed. In such a case, you can stop some devices, which are not in use, such as PCMCIA card, infrared devices, printer port (LPT1) and things like that. To perform the action, you can follow these steps:

Right-click My Computer -> Choose Properties -> Select Hardware -> Choose Device Manger -> Double-click the devices that you want to stop -> Choose Device usage -> Select Do not use this device -> Restart the computer. …

Multisystem VCRs

Posted on Posted in programming

Normally, a multi system VCR permits you to play video tapes from all over the world, but is not capable in converting the video signals. Therefore, if you are using a NTSC system, a multi system VCR may not allow you to watch a PAL tape on your NTSC television. A converting multi system VCR is then required which will convert its video output signal through a in-built video converter, so that a PAL video tape could be played on an NTSC TV. With an ordinary multi system VCR, you will need to procure an external Tenlab video converter or a multi system TV. Normally these days the multi system VCR’s are being manufactured with in-built Video Converters. A multi system TV is capable of playing all the video formats like NTSC, PAL and SECAM.

On the same fundamentals, whether the video signals are in PAL, NTSC or SECAM, a multi system VCR will have the corresponding output.

Now the question arises, how will you view the tapes on your TV?

Well, there are a number of ways to execute this. As mentioned above, only a multi system VCR alone won’t be helpful. You will need to have a TV, which has either an in-built converter or an external one. Therefore, to watch a PAL video tape on a NTSC TV with your multi system VCR, the signal from the VCR need to pass through the signal converter before your TV can operate in PAL.

However, some multi system VCRs already have the video converter installed internally, and in this case, there is no need to purchase an external one. The disadvantage to these VCRs is that the image quality they produce is not as good as a multi system VCR and an external video converter combination.

The other possibility is the combination of a multi system VCR and a multi system TV. As discussed above, a multi system VCR only supports the type of signal coming in and does not have the capability of signal conversions. A multi system TV, with its inherent conversion capability, transforms PAL, SECAM or NTSC signals appropriately, would play the video tape in your multi system VCR. The disadvantage of such playing arrangement is that, converted copies of the video tape cannot be made. On he other hand, there are no video degradation with the combination mentioned above.

The final possibility is to get a multi system TV/VCR combo. This solution is not recommended because TV/VCR combos tend to be of low quality.

Common characteristics of Multi System VCR

A VCR needs only two video heads. to record and playback a tape, Additional heads are used for special effects, if any, such as slow motion, freeze frame, etc. Many manufacturers are going for modification in the video heads in different ways to improve the picture quality. Many VCRs now offer quick play from the stop point. There are also a huge number of VCRs that provide quick access from fast forward or fast rewind …

Using Technologies Wisely To Build More Accessible Websites

Posted on Posted in website

Each website has an optimal design that fits perfectly to its thematic, requirements and visitors' type. For example, a web site offering e-cards will certainly need to catch the visitors' eyes, using images, animations and interactivity, while a site dedicated to science, teaching or investigation may not need any of those to show up their information and content .

The amount of animation or interactivity will certainly affect the accessibility of the web page given that the technologies used to provide this type of content are typically not supported by user agents or many times not designed for people with disabilities. To consider how many people you could be letting behind I will base my study on the statistics of this site (HTMLQuick.com) which is completely accessible and provides a lot of textual information.

To look at some round numbers I will say that if the content of the site would be completely based on Flash or JavaScript we would be losing from 1.77% to 4.55% of the visits due only to the lack of technologies, which could be a very large number of visitors if the site is successful. But lets take some considerations based on the most popular and problematic technologies available.

Flash

Flash is a great way to build animations and interactivity but could also be a big accessibility problem. Creating a website completely in Flash could let out a 2.78% of the visitors and make the site completely empty for search engines, which may be your primary inconvenience.

Many sites will look at Flash as a primary necessity while others may only use it for animation or will not use it at all.

– If your site does not need it, then try to use it only for animation or providing rich alternative texts.
– Avoid building menus in Flash, as user agents not supporting it will not be able to follow their links.
– Export the swf files using the lowest version possible. Only a 69.2% of the visitors use the latest version. The rest 29.03% will have to download before playing the movie.
– Try to make the movie size as little as possible so people do not get bored waiting for the page to load. There are still an 11.83% of visitors using dial-up connections.

JavaScript

JavaScript has similar issues to Flash. Many user agents will not support it, including search engines robots. A 1.77% of the visitors will not be able to see the information written in JavaScript nor follow the links.

– If possible use it only for not necessary interactivity and functionality.

– Otherwise, provide alternative static content in the "noscript" tag.

– Do not make it necessary to follow a link. Use the "location.href" command as the "onclick" event in a static link ("a" tag).

Frames

Frames are nice, but should be definitively avoided. While most of the user agents support frames, search engines, as well as blind people, could have been seriously confused when trying to relate the …

Using Articles to Advertise

Posted on Posted in website

Articles are a form of content advertising. When you learn something new, write about it. In your own words, write what you have learned. Write about products that you sell. You do not have to have any experience writing.
With that information you can send them to Article websites and they will publish your articles.

It is a way to get some exposure to your website. After submitting enough articles that are helpful and informative, individuals will see you as a leader and want to follow you. A lot of the websites that you submit to your article will have a profile you can set up. In that profile you can put your website.

You can do articles on anything that has to do with your business. You want to attract individuals to your business. This is a great way to get to know the products that you are selling and at the same time you are getting more customers or business partners.

You do not have to have any experience writing. Make sure your spelling skills are at their best. It does not have to be long. Usually around 250 words is what your articles should be. Try to write a lot of articles. Your articles are out there for a very long time. You will continue to get exposure for a very long time.

So when you decide to start article marketing, remember there is so much you can write about. You can write about the products that you sell, or anything that you have learned to do. Get creative and enjoy yourself. …

Electronics Industry Invests in Fashion Conscious Gadgets

Posted on Posted in gadget, internet

While gadgets have traditionally been attractive because they do novel or impressive things, many gadgets these days are designed with thought put into how they look. This is true for mobile phones more so than any other type of gadget. For example, the Motorola Razr phone was as much of a fashion statement as it was a useful device. "Was" is the operative word when considering the Razr because it has recently gone out of style and the number of units of the model sold have plummeted. That's illustrative of one of the dangers of making electronic devices that are designed to satisfy the fickle notions of fashion that many people have. That said though, a lot of companies are doing it anyway. For example, LG electronics which is based out of South Korea has jumped onto the fashionable mobile phone bandwagon. LG- which has been known for producing low cost handsets in the past- has more recently collaborated with Prada to produce a handset that bears the Prada name. The Prada phone was developed with image in mind when it came to everything from the look of the actual phone to the icons that go on the screen to the ring tones and to the hard leather case and lint cloth that comes with it.

The Prada phone also has a fair amount of functionality built into it including the ability to take digital photographs. It also has touch screen features and can be used to surf the Internet. The Prada phone is also a multimedia device that can be used to listen to music, look at digital photos, and watch video.

Another venture into the fashion world of LG can be seen in its newer sliding phones. With these gadgets the screen on the phone slides up to reveal the keypad. In addition to being flashy, these phones have some practical benefits as well. The most obvious benefit of this design is the fact that it allows for a larger screen on a more compact device.

In addition to practical concerns, this device also has a fair amount of flair built into it as well. One model has a polished black casing, buttons that glow red, and a screen that becomes a mirror when it's turned off. There's another model that features a shiny metal casing along with similar features to the one mentioned above.

There are a number of problems associated with making phones that are stylish. One problem is economic in nature. Namely, because fashion trends are so fickle and change so quickly, a company that focuses on making fashionable electronic products could quickly see all of its efforts to go the way of the Razr phone if the winds of style blow the wrong way.

The other problem with fashionable electronic devices is that in many ways, achieving a certain look presents engineering problems. For example, polished metal is stylish these days, but metal does not allow mobile phones to transmit and receive signals as …

Website Promotion Strategies – Using PPC Marketing

Posted on Posted in internet, website

As an effort to get website traffic, many website owners have already begun using pay-per-click advertising. When Google introduced Adwords, webmasters were impressed that they only had to pay a fee when someone actually visited their website.

Examples of PPC Marketing

Google AdWords allows advertisers to create advertisements (based on content) that ever appear on the search results page of the Google search engine. Websites that give the OK to allow these kinds of advertisements to appear on their pages will receive monetary compensation in return. Every time someone clicks on an ad displayed on a web page, the owner of the site accumulates profit.

Yahoo also offers pay-per-click advertising, although Google is the industry leader and most recognizable. Yahoo's pay-per-click program used to be called Overture, but is now called Yahoo Search Marketing.

Together, these two services make up the largest pay per click systems on the World Wide Web. However, many other individual sites provide website owners with different sponsorship capabilities, such as ExactSeek, ABC Search, and Enhance.

PPC Marketing Benefits

The attractiveness of pay per click is seen in the level of targeting available to advertisers. With PPC, it is rather uncomplicated to market to the kind of audience you wish to reach. Many site owners have positioned advertisements that only appear when specific search terms are used or on websites that cater to a particular kind of readership. This method increases the quality of traffic that visits a site – bringing in visitors that are more likely to show interest in the type of products or services you are offering.

Another benefit of pay per click advertising is the fact you only pay for the clicks to your site. There's no need to pay simply for exposure, you only pay for actual visitors who are interested in what is being sold at your site. In addition, tracking your results is not a hassle, because in-depth statistics (given in real-time) show you exactly how your marketing is doing. This is one reason PPC has gained a great following among online businesses that solely use the Internet for advertising, as well as traditional companies (bricks-and-mortar) that are searching for effective methods of marketing.

Because pay per click marketing allows webmasters to track and target their results, the offline advertising such as magazine, newspaper, and television have suffered a decrease in advertising sales. PPC has also replaced CPM (cost per thousand impressions) advertising that once served as the original foundation used to sell advertising on websites. With CPM, advertisers had to pay for their advertisements whether they produced traffic to their website or not. This method did help the branding of a business, but did not help much with getting sales. And advertisers were not able to track or modify their efforts because they had no way of assessing the effectiveness or progress of their ads.

If you want to get the best results possible from your pay per click campaigns, it is recommended to become familiar with how …

Microsoft Great Plains Customization Tools – Overview

Posted on Posted in programming

Formerly Great Plains Software Dynamics / eEnterprise, and currently Microsoft Business Solutions Great Plains was initially designed in the early 1990th as the extendable and modular application with its proprietary tool: Great Plains Dexterity, written in C programming language as a shell. This was popular tendency those days -compare with SAP ABAP or Navision C / Side. Great Plains has additional ideas – database platform independence and graphical platform independent interface (initially targeted to both Apple Macintosh and Microsoft Windows with good chance that one of them will take market over – and it did happen, including the acquisition of Great Plains Software by Microsoft ). In this small article we'll give you revised overview – you can find previous publication in the last year posts.

o Great Plains Dexterity. Dexterity is the architecture of Great Plains and it is very difficult to take it out of the picture. So we'll say that if you plan on creation GP module or custom piece for reselling it on the market – you should first consider Dexterity as a tool. Dexterity requires deep training and some experience – you can not begin programming in Dexterity over night. So-called fat client of Great Plains is pure dexterity application, although database itself since version 8.0 is MS SQL Server with some Dexterity specifics (DEW_ROW_ID column, for example).

o Old Tools. These tools were popular in 1990th and relate to such now legacy technologies as OLE, VBA scripting, etc. Please note that even if C was considered as universal language – custom scripts were targeted for light customizations and both C and VBA were targeted to modify fat client – thin client and web interface were not known those good old days.

1. VBA / Modifier. Microsoft introduced VBA as scripting for light customization of Microsoft Office products – Excel, Word, etc. Great Plains adopted it for its own needs. It tried to produce Dexterity / VBA hybrid and allowed Dexterity forms to be modified via Modifier (Dexterity application) and enabled modified screens to adopt VBA for its fields.

2. Continuum for VB / Dephi. Borland was strong on the customization market – this is why it also includes Delphi. In Continuum you can program Great Plains workstation as OLE server. For example – you can have Great Plains Integration Manager integrate multiple companies data one-by-one with automatic logging in and off without operator intervention – over night for example. Also – you can deploy Continuum to switch Dexterity modules (such as Intellisol APOP or Project Accounting) and include Dexterity Sanscript code into VBA scripts.

3. ReportWriter. We placed RW in this section because it is Dexterity application and is now actively replaced with new tools, such as Crystal Reports, SQL Reporting, XML & HTML web publishing

o New Tools. In XXI century development world begins to bias toward thin and web clients and SQL scripting. eCommerce is a must for retail and wholesale nationwide businesses and Microsoft Business Solutions come with these tools:

1. …

What Everybody Ought to Know About Linkbait and Modern SEO

Posted on Posted in seo, website

A successful linkbait is one of the fastest and most inexpensive ways to build thousands of good quality backlinks pointing to your site. But here is the best part: it is the way Google wants you to build links.

Let us start by describing the concept of linkbait for those who are not familiar with it. Linkbait referes to the art of creating content with the main purpose of attracting links to your site.

Nothing new, you may be thinking. Linkbait is basically good content, right?

Well in a way it is, but there is more to it than that. Let me start by telling you why linkbait is so popular nowdays among Search Engine Optimizers (also known as SEOs.)

A few years ago when SEO professionals wanted to promote a website in the search engines that would do what was working at the moment: reciprocal link exchanges. An SEO would set up a website, put some content on it, and start sending emails to webmasters offering a reciprocal link exchange. If the webmaster accepted both sites would display a link back to the other site.

This used to work well until Google and the rest of the search engines realized that the technique was getting abused and reciprocal links were not any an indication of one site's popularity.

At this time most SEO practitioners agreed that the best way to achieve Search Engine Rankings was to get one way links pointing to their sites. A one way link was worth a lot more than reciprocal link exchanges. This is when the link buying market boomed, using the Page Rank metric as the main market arbitrager.

So basically all an SEO did was open her wallet and buy as many links as she needed to rank for certain keywords. This worked well for a while but of course it did not take Google long to figure out that these type of links were not an accurate indication of a website's popularity.

So Google is now penalizing sites that buy and sell links. Many SEOs and webmasters are complaining about this because they are left without ideas. They think this is unfair.

I personally think that Google has every right to decide what is the best way to decide what a site popularity is. I also agree on the fact that paid links are not an indication of site popularity. So instead of complaining about what does not work anymore, why do not we talk about what does work?

What works now is Linkbait., So how do you create a linkbait?

1. Visit Digg, Reddit, Del.icio.us, Propeller and other popular social media sites and research for stories related to your niche that have become popular in the past.

2. Analyze all these stories and use them as the basis of your brainstorming. You want to understand why these stories were popular among these communities.

3. Write your article. Some article formats have better chances of becoming popular in social media sites. …